Facial Mask Material: 40g Microfiber

What is Microfiber?
Fibers with a density of 0.3-1.0 are generally called microfibers, which are very fine, strong and soft. Fibers are split into microfibers by high-pressure water flow, so microfibers are very delicate and soft; It can produce more adhesive area on the skin and good fit to skin.

Characteristics
0.6dtex: The thickness of a viscose microfiber is only 0.6dtex. It is made of mask material using advanced nanotechnology, which is highly skin-friendly, soft and lubricated, and ultra-fine with extreme skin feeling. The cross-sectional area of "100" viscose microfibers is equivalent to the cross-sectional area of "1" hair. (Fiber fineness unit Fen Tex, symbol dtex, refers to the weight of 10000 meters of yarn under the common moisture return rate in grams. That is, 1 dtex=1g/10000m.)

High water absorption：The high-tech water-retaining and water-locking design can absorb high concentration serums and lock more serums at the same time.

Grid texture：The special mesh process, in addition to increasing the permeability of the mask, also because of the characteristics of the surface tension, the serum is tightly gathered in the mesh.

Soft fit to skin：Because it is a microfiber, the mask is very soft and has good skin suitability and wrapping property.

Deep cleanse：The extremely fine cilia of microfibers can grasp every inch of the pores of the face skin, and absorb the dirt in the pores while injecting nutrients into the skin.

Demonstrate：

Dependence test
Absorption Test：In order to verify the water absorption of our cotton pad, we conducted a washing test. We first weighed the mask alone at 1.209 g, then poured 50g of pure water into it. After soaking for 10 minutes, the remaining water after the mask absorbed water was 32.077g. Thus, we obtained the 40g microfiber mask water absorption: 17.933g; Water absorption ratio of about 14.8

Air permeability test：From our experimental test, using 100℃ boiling water for 15 minutes penetration experiment, 40g microfiber cup wall condensed into more and larger water beads, permeability is higher than ordinary microfiber. In terms of appearance, the 40g microfiber grid texture is more breathable. It can be seen from this compared with the ordinary microfiber, our grid texture microfiber mask has better air permeability;